The state-of-the-art VIPA PROFIBUS Connector w/ diagnostic LEDs
Ordercode: VIPA 972-0DP20
Connects PROFIBUS net components to a PROFIBUS line
This PROFIBUS connector is oriented at a 45 degree angle to the PROFIBUS line in order to provide easier cable access and management.
The PROFIBUS connector also has the following features:
- 45 degree connector orientation to line
- Four Diagnostic LEDs
- Rugged, All Metal Casing for Low Noise Interference
- Integrated PG Port
- Switchable Terminating Resistor
- EasyConn fast connection via integrated cutting clamps
| Light | Color | State | Condition |
|---|---|---|---|
| PWR | Green | ON | Power Supply is OK |
| Off | Power Supply fault | ||
| Flashing | Initial self-test | ||
| TXD | Green | Flashing | Active communication |
| Off | No communication detected | ||
| Term | Green | Off | Termination Switch is Off |
| On | Termination Switch is On | ||
| Flashing | Defective termination resistor | ||
| ERR | Yellow | Off | No errors detected |
| On | Incorrect termination or poor connection | ||
| Flashing | Signal levels are out of the defined range |
Download the PROFIBUS Connector specifications sheet
Datasheet
Replacement For:
- Molex/Woodhead PA9D0B-42
- Molex/Woodhead 120103-0003
